Λεπτομέρειες προϊόντος

€ 269,00

Δωρεάν μεταφορικά σε παραγγελίες άνω των €99


The Kéo Blade 2 is the result of a long process undertaken by LOOK engineers to optimize all the innovative concepts that were developed for the Keo Blade Carbon. The Kéo Blade 2 is a more reassuring, more stable, lighter and more powerful pedal. Its design completely integrates the blade for better aerodynamics.

  • The Kéo Blade 2 concept, based on a carbon blade, allows for a more rigid cleat release, which ejects the foot much faster at the end of the release process than a traditional spring. This makes the pedal very safe and allowed Look to remove the resistance setting. However, to satisfy all cyclists, the Kéo Blade 2 is available in 3 different hardness ratings: 12Nm that will be ideal for most users, 16Nm for riders seeking more support and 20Nm for those looking for maximum support. It is possible to switch from one version to another by changing the blade with a special tool.
  • With the full integration of the carbon spring blade into the body of the pedal, the Kéo Blade 2 is the pedal with the best aerodynamic profile ever created. In addition, the two channels on either side of the body allow for optimal air flow.
  • The Kéo Blade 2 features a 68mm wide stainless steel plate moulded into the body, which allows the cleat maximum contact with the pedal at all time, whatever the pedalling angle adapted.
  • To improve the stability and the foot support, the design ensures that the shape of the cleat fits perfectly that of the stop and is always in contact with it, whatever the pedaling angle.
  • The weight of the pedal has been reduced compared to the previous version. This is possible thanks to a thinner spindle which is lighter, and also to a weight gain on the material of the pedal body.
  • Particular attention has been paid to reliability: high resistance body, stainless steel bearing surface, oversized spindle shaft with dual seals, making this pedal a very safe and durable product.
  • To achieve greater efficiency, the Kéo Blade 2 spindle has reduced the stack height by using an oversized Titanium spindle. It is composed of two miniature ball bearings: one 12mm inner x 18mm outer diameters, one 6mm inner x 12mm outer diameters and a needle roller bearing. LOOK spindles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90kg on the center of the pedal and an eccentric rotation (replicating a bump each revolution). This test is much higher than the current standard: the EN14781. A double seal ensures the bearings have a very long service life.
  • Weight: 90g per pedal (248g the pair with cleat and hardware)
  • 100% Made in France

Δεν υπάρχουν αξιολογήσεις για το προϊόν ακόμη.

Παρακαλώ συνδεθείτε για να αξιολογήσετε. Σύνδεση